The BL-2s™ brushless power system delivers more speed, faster acceleration, and virtually maintenance-free operation at an affordable price. Drivers experience smooth, effortless power with added punch for tire-shredding burnouts and blazing fast speed. Optimized for 7-cell NiMH and 2s LiPo batteries, the BL-2s delivers all-day fun, battery after battery.
BL-2s Brushless Electronic Speed Control
The waterproof BL-2s speed control delivers all the benefits of brushless technology with the safety and convenience features you expect from Traxxas. Built-in low-voltage detection, thermal shutdown protection, and EZ-Set® one button programming make BL-2s reliable and easy to operate.
BL-2s ESC Features:
Fully waterproof
Built-in two-stage low voltage detection for lithium polymer (LiPo) batteries
NiMH battery packs 6-7 cells (7.2 - 8.4 V) or 2-cell LiPo battery packs (7.4 V)
Patented Training Mode™ reduces the power output by 50% for new or younger drivers. When they're ready, simply change profiles to unleash full-throttle action.
EZ-Set® one-button setup operates and programs just like other Traxxas speed controls
Multi-color status LED
Two-stage thermal shutdown protection protects the BL-2s from overheating
Large aluminum heatsink dissipates heat
Built-in auxiliary fan output
Keyed motor connector
Three programmable drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode™– 50% Fwd / Brake / 50% Rev
BL-2s Brushless Motor
The sensorless BL-2s 3300 kV motor delivers the all-day speed and torque you expect from brushless technology, without the high price tag. With no brushes to wear out, the BL-2s is long-lasting and virtually maintenance free. Low-friction ball bearings and an integrated cooling fan open the door to all-day fun.
BL-2s Brushless Motor Features::
Integrated cooling fan
Low-maintenance design
High-speed ball bearings
3300 kV
Integrated Cooling Fan
With no brushes to wear out, the BL-2s brushless motor delivers long-term fun with very low maintenance. An integrated fan pulls cooling air through the motor for all-day running without slowing down.
Quick Connect Motor Plug
The Traxxas Quick Connect Motor Plug delivers free-flowing power from the ESC to the motor. The specially-keyed design aligns the plug in the correct orientation every time.
BL-2s WATERPROOF ESC SPECIFICATIONS
Input Voltage: NiMH 6-7 cells (7.2 to 8.4 volts) or LiPo 2 cell (7.4 volts)
Case Size: W39 x D59 x H31mm
Weight: 87 grams
Reverse Delay: Yes, with lockout
BEC Voltage: 6.0 volts
BEC Current: 3 amps
Input Wire: 14 gauge
Motor Connectors: Quick Connect Motor Plug
Input Harness Wire: 26 gauge
Low Voltage Detection: 2-stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Single-Button Setup: Traxxas EZ-Set®
Battery Input Connector : Traxxas High-Current Connector
Motor Types: Brushless
Accessory Port: Auxiliary fan
Profile selection:
Sport Mode: 100% Fwd, 100% Brake, 100% Rev
Race Mode: 100% Fwd, 100% Brake, No Rev
Training Mode:* 50% Fwd, 100% Brake, 50% Rev
*Patented
BL-2s BRUSHLESS MOTOR SPECIFICATIONS
Type: Sensorless brushless
kV: 3300
Wire Size: 16 gauge
Cooling: Integrated cooling fan
Motor Length: 57mm
Can Diameter: 37mm
Weight: 201gr
Replacement part for these models:
Rustler® 4X4 Brushless
Slash® 4X4 Brushless
Stampede® 4X4 Brushless
Slash® 2WD Brushless